Artinis’ PortaLite

50 sec read

Note: I am not affiliated with Artinis and they don’t pay me for this post. If you also sell portable NIRS device and would like to demo to me, I am happy to see it.

Marco, the salesman of Artinis, gave me a demo of their wireless/portable NIRS device (portalite) thru skype. Here is what I have learned:

  1. The system consists of a head band with 3 emitters and 1 receivers (so totally 3 channels). The head band is connected with battery/transmitter/bluetooth via a white wire. The battery/transmitter/bluetooth is as big as a smart phone (but thicker) and can be put around the waist. The data will be transmitted to a computer via bluetooth which is within 150m.
  2. Totally 3 channels; but they also calculate oxy% saturation from the 3 channels (I don’t know how).
  3. The computer is installed with a software (oxysoft) which can visualize the data in real time. Heart beating signal is very clearly seen. The software can receive up to 7 devices (good for hyperscanning)
  4. Moderate head motion seems produce little artifact; but bending the waist produces big signal change.
  5. The subject can walk/talk during the experiment, which is nice for naturalistic experiment.
  6. It’s possible to use a smartphone (instead of a computer) to receive the data; but they need to develop it.

If you need to know more details, please visit the product page:



写作助手,把中式英语变成专业英文


AI writing papers with real references


Want to receive new post notification? 有新文章通知我

第七十期fNIRS Journal Club视频 李日辉团队

Youtube: https://youtu.be/tpP3Cge6T0M 优酷:https://v.youku.com/v_show/id_XNjUxNzc2Njc4OA==.html?playMo
Wanling Zhu
28 sec read

第七十期fNIRS Journal Club通知2026/3/7, 10am 李日辉团队

传统fNIRS测量由于通道距离单一,干扰源多,存在空间分辨率不足,信号有效成分低的缺点。来自澳门大学的李日辉团队将分享基于多距离、高密度fNIRS的DOT成像技术,并通过单脑运动和双人社交互动范式验证
Wanling Zhu
22 sec read

第六十九期fNIRS Journal Club视频 赵伟华课题组

Youtube: https://youtu.be/VKMgJT9oESI 优酷: https://v.youku.com/v_show/id_XNjUxMzkzOTkyNA==.html?playM
Wanling Zhu
17 sec read

2 Replies to “Artinis’ PortaLite”

  1. Hey, Xu Cui! Do you remember me? We had an interview about 2 years ago when I was trying to search a postdoc position in your lab. Now I am working as a postdoc in Switzerland, my reserch now focuses on sleep research using NIRS. I also have some contact with Artinis and Marco. Their system could calculate oxygen saturation based on spatially resolved spectroscopy (SRS). Now I am using NIRO-300 to do my tests, and I will buy a new system from Artinis.

  2. @Zhongxing Zhang
    Hi, Zhongxing,

    Of course I remember you. I really like the topic (sleep) and think there is a lot to be done. And thanks a lot for letting me know how Artinis calculates saturation.

    Which lab are you in?

Leave a Reply to Zhongxing Zhang Cancel reply

Your email address will not be published. Required fields are marked *